Using these numbers, you can tune oil viscosity with a very high degree of precision in a specific heat range. ‘cSt’ stands for CentiStokes, an accurate dynamic measure of viscosity ( ISO 3104:1994 & ASTM D445-04). Modern fluid viscosity ratings are on an ISO VG (visocosity grade) using test standards set down by ASTM D-2422-97 (2002)& ISO 3448:1992 system of: / / VI. These forks tend to use oils in the ISO 16 range. This is a very important bit of information for the mechanic.ĪTF is far too thick to be used in a modern cartridge damper fork. This means that if you are in Florida or Mongolia, AFT is going to be available and consistant. Why? Of all the commonly available automotive fluids capable of being used in the system, ATF is manufactured within a very, very tight and suitable viscosity range, esentially ISO 34. Aside from other changes that effect damping, the viscosity of the oil and how the viscosity changes as the oil heats up will be large factors in the system.įor years, ATF has been the standard fluid for damper rod forks. In addition to providing a lubricating and cooling bath for the dampers and bushings of the fork and shock to function in, the suspension fluid is the medium that is used to provide damping in a modern system.Įssentially, the oil is forced through an orifice or past a spring loaded shim to creating a resistive force to the action of the shocks. 9 Comercial Brands and their properties.

Mtb fork oil viscosity chart